Connect with us

Car

How to revive and Start a Car that has been Sitting Idle for Months?

Published

on

How to revive and Start a Car that has been Sitting Idle for Months

It is quite common for individuals to experience trouble while re-starting cars that have been sitting in storage for months. If you haven’t used the car in a while, it might not start right away. You must take some time to ascertain the condition, check for its vitals, and eventually consider warming up with a 30-minute stroll.

Reviving the car after months of hibernation is a step-pronged process. The basic approach is segregated into three parts, i.e., checking for Issues, attending to the Problems, and warming the vehicle up.

If you are unsure about covering each step on your own, connect with a credible car repairing specialist or individual.

In the subsequent sections, we shall look at each one of these aspects, from a technical standpoint:

  • Checking the Car for Issues

Start by checking for engine-related issues, if any. For vehicles that haven’t been started for three to six months, you can just use a dipstick to check for the oil level and texture. In case the engine oil is gritty and thick, consider replacing the same.

If you usually park the car outside, it is crucial to make sure that the lights are in working conditions. These include brake lights, fogs, headlights, and more. Moving on, checking for leaks is crucial, with different color codes designated for transmission leaks, steering leaks, and brake system leaks.

You should check for the sanctity of the brake system, by identifying the brake fluid and instances of water contamination, if any. However, it is the battery that deserves all the mention. If you haven’t started the vehicle in months, you have to recharge or replace the battery. The best way to check for the same is by attempting to jumpstart the same.

  • Attending to the Problems

Now that you have checked for some of the more crucial issues related to the car revival, it is necessary to attend to the same. If the engine oil requires a refill, change, or both, attend to the same on a priority basis before you consider taking the car out on a stroll. In case there is a leak, try getting it fixed by calling a   qualified technician.

If not, check and attend to the coolant. Most importantly, you need to get the battery charged or replaced before you can even prepare for ignition. However, if you were proactive and disconnected the battery prior to car storage, a basic cleaning routine using baking soda and water would suffice.

Nevertheless, if the battery is fully discharged, consider reviving the conductive properties by externally charging the same. Lastly, once all the loose ends have been taken care of, prepare for the ignition by removing the spark plugs, adding lubricant, and firing the engine, incrementally. At this point, jumpstarting the vehicle isn’t advised.

If you encounter gasoline issues, consider removing and refilling while changing the air filter as well.

  • Warming the Vehicle Up

Before you take the car out, you must allow the engine to rev for a while. This process will warm the vehicle up almost miraculously. While the car is running, quickly check it once again for leaks, levels of transmission fluid, and the air filer viability. Besides that, it is also advisable to check and fix the bump stops, rusted shafts, and shock leaks to give your car the ultimate makeover.

Also, for high beam lights and headlights and give some thought to the blown fuses before getting rid of them. Once the issues are sorted, take the vehicle out for a short  15-min drive.

Getting a car up and running after it has been idle for months isn’t as straightforward as it seems. Instead, you must check for all the aspects mentioned above, to make sure that the vehicle is brought back to the original condition sans any compromises in safety and efficiency.

Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Trending